Volume 5, Issue 1, June 2019, Page: 1-5
Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears
Tang Rui, Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China
Ling Yun, Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China
Received: Apr. 21, 2019;       Accepted: Jun. 2, 2019;       Published: Jun. 13, 2019
DOI: 10.11648/j.ijsqa.20190501.11      View  116      Downloads  8
Abstract
In this paper, two types of point contact and line contact of spiral cylindrical gear transmission pair are studied and analyzed. The influences of the axis parallelism error and the center distance error on the contact area are analyzed. The numerical example shows that the line-contact transmission pair has larger contact area if the installation error is not considered. By using MATLAB software and simulation example, the influence of axis parallelism on contact area and meshing performance of spiral cylindrical gears under different error conditions are obtained.
Keywords
Circular-Arc-Tooth-Trace Cylindrical Gear, Parallelism Error, Meshing Performance
To cite this article
Tang Rui, Ling Yun, Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears, International Journal of Science and Qualitative Analysis. Vol. 5, No. 1, 2019, pp. 1-5. doi: 10.11648/j.ijsqa.20190501.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Liao Yinghua, Liu Gaojun, Sun Xiangguo. Development of an intelligent CAD system for involute cylindrical gear cutting tools [J]. Applied Mechanics and Materials, Mechatronics and Applied Mechanics III, 2014, 532: 249-252.
[2]
Dai Fengyan, Shi Zhaoyao, Lin Jiachun. Development and research on gear noise test system [J]. Advanced Materials Research, Engineering Solutions for Manufacturing Processes IV, 2014, 889-890: 718-721.
[3]
T. Masuyama et al. Bending strength simulation of asymmetric involute tooth gears [J]. Journal of Advanced Mechanical Design, Systems and Manufacturing, 2015, 9 (5): 15-00485.
[4]
Li Haixiang. Basic theory and experimental research on involute arc gear transmission [D]. Chongqing University, 2012.
[5]
Sun Xiaowei. Characteristics and processing methods of spiral gears [J]. Mechanical Engineer, 1999 (8): 22-22.
[6]
Song Aiping, Wu Weiwei, Gao Shang, Gao Wenjie. Ideal Geometric Parameters of Arc-toothed Cylindrical Gear and Its Processing Method [J]. Journal of Shanghai Jiaotong University, 2010. 44 (12). 1735-1740.
[7]
F. L. Litvin. Gear Geometry and Applied Theory [M]. Shanghai: Shanghai Science and Technology Press, 2008.
[8]
R. T. Tseng, C. B. Tsay. Contact Characteristics of Cylindrical Gears with Curvilinear Shaped Teeth [J]. Mechanism and Machine Theory, 2004, 39: 905-919.
[9]
FL Litvin et al. Topology of Modified Surfaces of Involute Helical Gears with Line Contact Developed for Improvement of Bearing Contact, Reduction of Transmission Errors, and Stress Analysis [J]. Mathematical and Computer Modelling, 2005, 42: 1063-1078.
[10]
Tang Jinyuan, Chen Xingming, Luo Caiwang. Contact Analysis of Cylindrical Gear Considering Tooth Shape Modification and Installation Error [J]. Journal of Central South University: Natural Science, 2012, 43 (5).
[11]
Jijun Sun, Li Hou, Contact Strength Analysis of Circular-Arc-Tooth-Trace-Cylindrical Gear [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2016, 38 (3): 999-1005.
Browse journals by subject