Volume 4, Issue 3, September 2018, Page: 93-99
Inter-Laboratory Study for the Asbestos Detection in Bulk Materials: First Italian Scheme
Antonella Campopiano, Department of Medicine, Epidemiology, Occupational and Environmental Hygiene, National Institute for Insurance against Accidents at Work (INAIL), Monte Porzio Catone, Rome, Italy
Angelo Olori, Department of Medicine, Epidemiology, Occupational and Environmental Hygiene, National Institute for Insurance against Accidents at Work (INAIL), Monte Porzio Catone, Rome, Italy
Biagio Maria Bruni, Department of Technology and Health, National Health Institute (ISS), Rome, Italy
Luciano Benini, Asbestos Regional Center of Marche, ARPAM Pesaro, Italy
Mauro Campanella, Asbestos Regional Center of Abruzzo, ARTA Teramo, Italy
Fulvio Cavariani, Asbestos Regional Center of Lazio, ASL Viterbo, Italy
Adriano Fava, Asbestos Regional Center of Emilia Romagna, ARPA Reggio Emilia, Italy
Patrizia Garofani, Asbestos Regional Center of Umbria, AUSL 2 Assisi, Italy
Luigi Leone, Asbestos Regional Center of Basilicata, ARPAB Potenza, Italy
Claudio Martinelli, Asbestos Regional Center of Veneto, ARPA Verona, Italy
Mariano Alessi, General Direction of Health Prevention, Italian Ministry of Health, Rome, Italy
Received: May 2, 2018;       Accepted: May 29, 2018;       Published: Jun. 19, 2018
DOI: 10.11648/j.ijsqa.20180403.15      View  600      Downloads  35
Abstract
Italian Health Ministry established by regulation the minimum requirements for laboratories intending to perform asbestos analysis and the organization of a quality control scheme to which the laboratories must refer. Three proficiency testing schemes for asbestos detection in bulk materials using polarized light microscopy (PLM), X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) were developed according to the regulation of Health Ministry. The schemes were organized in rounds. In each round the laboratory received one batch of 4 samples. The participant laboratories were 475. The performance of laboratory as satisfactory, unsatisfactory or awaiting classification. The samples of the rounds were real world materials from abatement project and might contain any of the asbestos types. Ceiling-tile containing vitreous fibers caused the highest frequency of false positive; 87% of errors incurred in FTIR and 60% in XRD. Vinyl-floor tiles caused most false negative; 100% of errors incurred in PLM in the second pilot program, 13% in FTIR and 10% in XRD. One of the main factors causing variability of results turned out to be related to the skill of the analysts. Training and experience of the analysts help to get a reliable and reproducible asbestos analysis.
Keywords
Asbestos Containing Materials, Quality Control Scheme, PLM, XRD, FTIR
To cite this article
Antonella Campopiano, Angelo Olori, Biagio Maria Bruni, Luciano Benini, Mauro Campanella, Fulvio Cavariani, Adriano Fava, Patrizia Garofani, Luigi Leone, Claudio Martinelli, Mariano Alessi, Inter-Laboratory Study for the Asbestos Detection in Bulk Materials: First Italian Scheme, International Journal of Science and Qualitative Analysis. Vol. 4, No. 3, 2018, pp. 93-99. doi: 10.11648/j.ijsqa.20180403.15
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Lynch K. M. (1955). Pathology of asbestosis. Arch. Ind. Health 11, 185-188.
[2]
McCaughey W. T. E. (1958). Primary tumors of the pleura. J. Path. Bact. 76, 517-529.
[3]
Bader M. E.; Bader R. A., Tierstein A. S., J. Sclikoff (1965). Pulmonary function in asbestosis: serial tests in a long term prospective study. Ann. NY Acad. Sci. 132, 391-405.
[4]
Wagner J. C. (1965) Epidemiology of diffuse mesothelial tumors. Ann. NY Acad. Sci. 132, 575-578.
[5]
Rom W. N. (1998) Asbestos-related Disease. In: Environmental & Occupational Medicine, 3rd edition, (Lippincott-Raven Publishers) Philadelphia, pp. 349-375.
[6]
Kalnas, J. (2000) Diagnosis and risk of asbestos-related diseases in an era of decreasing exposure. In: Peters & Peters, editors, Asbestos Disease Control, vol. 21, (LEXIS Publishing) 339-381.
[7]
International Agency for research on Cancer (IARC) (2017) Agents classified by the monographs.. Lyon, France. vol 1-117.
[8]
Health and Safety Executive (HSE) (2012) Asbestos: The survey guide. HSE Books ISBN 978 0 7176 6502.
[9]
Kwon J., K. Jangt, E. Hwang, Ki-Woong Kim (2017) Development of the KOSHA Proficiency testing scheme on asbestos analysis in Korea. Safety and Health at Work. 8, 318-321.
[10]
American industrial Hygiene Association (AIHA) (cited May 2018). Available from https://www.aihapat.org/Programs/BAPAT/Pages/default.aspx
[11]
Health and Safety Laboratory (HSL) ((cited May 2018). Available from https://www.hsl.gov.uk/proficiency-testing-schemes
[12]
Italian Ministry of Health, DM 14 May 1996: Normative e metodologie tecniche per gli interventi di bonifica, ivi compresi quelli per rendere innocuo l’amianto, previsti dall’art. 5, comma 1, lettera f), della legge 27 marzo 1992, n. 257, recante norme relative alla cessazione dell’impiego dell’amianto. Gazzetta Ufficiale della Repubblica Italiana n. 251, 25 October 1996.
[13]
Verein Deutscher Ingenieure (VDI), (2001) Determination of asbestos in technical products. Infrared spectroscopy method. VDI 3866 Part 2. October.
[14]
McCrone W. C. (1996) Detection and identification of asbestos by microscopical dispersion staining. Environ Health Perspective 9, 57-61.
[15]
Ganotes J. T., H. T. Tan (1980). Asbestos identification by dispersion staining microscopy. American Industrial Hygiene Association Journal 41(1), 70-3.
[16]
Crane D.T. (1992). Polarized light microscopy of asbestos. Method number ID 191. Salt Lake City, UT: Occupational Safety & Health Administration.
Browse journals by subject